DELIGHT 12V 24V Mppt Hybrid Charge Controller

The wind and solar hybrid controller is divided into a control circuit and power circuit according to the function module. The control circuit includes a single chip microcomputer. AD conversion circuit. Display button circuit. 10 drive circuit. Hardware protection circuit and interface circuit; battery collected by power circuit board. Solar panel. LED lamp voltage and current signal are sent to AD conversion through interface circuit. The circuit and the AD conversion circuit convert the signal into a signal that can be recognized by the single-chip microcomputer, and send the single-chip microcomputer, and the single-chip computer processes the converted result, and then gives a control command, which is sent to the display button circuit and the IO driving circuit; the power circuit includes the battery circuit Solar panel circuit. LED lamp circuit. Wind turbine circuit. Unloading comparison circuit. Fan unloading circuit and interface circuit, external equipment battery. Solar panel. LED light is connected to battery circuit. Solar panel circuit and LED. The lamp circuit is sent to the unloading comparison circuit via the voltage signal outputted by the wind turbine circuit, and is compared by the unloading comparison circuit, and a control command is issued to the fan unloading circuit

Our Difference

SATISFACTORY SERVICE
- 15 working days delivery
- 5 years warranty
- on-site installation instruction

ADVANCED LIGHTING TECHNOLOGY
- Design for lighting applications
- Dimming and operating profiles for adaptive lighting
- Superior LED luminaires

CUSTOM SOLUTION FOR YOUR APPLICATION
- Precision- engineered for your application
- Array for solar engines available for your application
- Aesthetic- design and value-built engine options

Production Description

MPPT Wind solar hybrid street-lighting controller is the firstly apply MPPT technology for the small power wind generator in China. With the application of this technology, the charge efficiency has vastly improved under the situation of low-wind, and obviously exceed the traditional PWM charging mode of 30%. Presently, we have solved such so technical problem on charging efficiency of the low-power wind generator already. Especially apply to the horizontal and vertical low-power wind generator of 100W to 600W. This type of controller has strong compatibility and great various protection functions, have more 10 years of application practice to improve performance continues to make it has high reliability and stability. It can be used to the street lighting, monitoring system, outdoor advertisement, home type generation system etc

Performance characteristics:
1.) Digital design, the module non-contact structure, stable and reliable performance.
2.) MPPT technology, breeze start, to solve the low wind speed fan dormant state.
3.) Wind turbine low-voltage charging, charging sampling points can be set. (PWM controller requires the fan voltage to be higher than the battery to charge)
4.) 12V / 24V automatic identification, versatility.
5.) 200W-600W series of general, compatible with all types of systems.
6.) LCD display running data, abnormal information display.
7.) Dual output, with light control, time control, 24 hours of output and other output.
8.) User programmable. Including the output mode, voltage point, boost point, light control point, time and other parameters

Protective function:
1.) Wind turbine speed limit protection
2.) Component open circuit protection
3.) Anti-reverse protection
4.) Battery overvoltage / over discharge protection
5.) Battery power down protection
6.) Battery loss protection
7.) Overload protection
8.) Short circuit protection
9.) Anti-reverse protection

Application:
1- Stand-alone wind/solar hybrid power station.
2- Standalone domestic household wind/solar hybrid power system.
3- Mobile Communication base stations, expressway, and other non-residential regions.
4- Coastal islands, remote mountainous, border posts for regions shortage of or without electricity.
5- Government demonstration projects, landscape lighting project, street light project etc.

Package for Solar led Street Lamp

Package: Export standard carton with foam inside for tough handling and long-distance ocean transport

Production process

Payment & Delivery

Payment terms	T/T	EXW	30% In advance, 70% before delivery
		FOB
		CFR/C&F	30% In advance, 70% against copy of B/L
		CIF
	L/C	Total amount above USD50,000, we accept L/C at sight
	West Union	Total amount less than USD5,000
	PayPal
Delivery time	15-20 working days after receiving down payment for one container

FAQ:
Q1. Can I have a sample order for wind solar hybrid charge controller
A: Yes, we welcome sample order to test and check quality. Mixed samples are acceptable.

Q2. What about the lead time?
A: Sample needs 3-5 days, mass production time needs 2-3 weeks for order quantity more than one container

Q3. Do you have any MOQ limit for Off-grid wind solar charge controller order?
A: Low MOQ, 1pc for sample checking is available


Q4. How do you ship the goods and how long does it take to arrive?
A: Airline and sea shipping also optional. Shipping time depends on distance.

Q5. How to proceed an order for wind and solar hybrid charge controller?
A: Firstly let us know your requirements or application.
Secondly, We provide solution according to local sun weather conditions.
Thirdly customer confirms the samples and formal order.
Fourthly We arrange the production.

Q6. Is it OK to print my logo on wind solar hybrid charge controller product?
A: Yes. Please inform us formally before our production and confirm the design firstly based on our sample.

Q7: Do you offer a guarantee for the products?
A: Yes, we offer 3-5 years warranty to our products.

Q8: How to deal with the faulty?
A: Firstly, Our products are produced in strict quality control system and the defective rate will be less than 0.2%.
Secondly, during the guarantee period, we will send new lights with a new order for a small quantity. For defective batch products, we will repair them and resend them to you or we can discuss the solution including re-call according to the real situation.

Thank you for visiting our website, further questions please feel free to contact us. We will do our best to support you all the time.

Contact us if you need more details on How to Make a Remote Controller. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Wind Turbine Controller Definition、Mppt Wind Charge Controller. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Controller > Off-grid Wind Solar Hybrid Controller